Air Hydraulic Pump

Universal Pedal Pneumatic Pump 2.3L 10000 PSI

Universal Pedal Pneumatic Pump 2.3L 10000 PSI
Universal Pedal Pneumatic Pump 2.3L 10000 PSI
Universal Pedal Pneumatic Pump 2.3L 10000 PSI
Universal Pedal Pneumatic Pump 2.3L 10000 PSI
Universal Pedal Pneumatic Pump 2.3L 10000 PSI
Universal Pedal Pneumatic Pump 2.3L 10000 PSI
Universal Pedal Pneumatic Pump 2.3L 10000 PSI
Universal Pedal Pneumatic Pump 2.3L 10000 PSI

Universal Pedal Pneumatic Pump 2.3L 10000 PSI    Universal Pedal Pneumatic Pump 2.3L 10000 PSI

10000 PSI 2.3L Foot Pedal Pump Pneumatic Machines. Sufficient power: easily reach 70Mpa ultra-high pressure 2. Quick oil, is 1,5 times the speed of ordinary pneumatic pump 3. Two-stage pressure relief, small flow pressure relief at the first stage and large flow pressure relief at the second stage, meeting the requirements of different oil return speeds.

Daily use, maintenance and beauty protection of hydraulic system 1. The air pipe and oil pipe joint must be cleaned before connection, otherwise the impurities entering into the pipe will damage the cylinder and the hydraulic parts, greatly shortening the service life of the pneumatic pump. 2, access to the air source of the pneumatic pump, must pass in addition to water, air compressor, air tank to do every day drainage, the end of the air source of the pneumatic pump had better add a separate filter, to ensure the clean air source, this will greatly extend the service life of the pneumatic pump.

Replace the hydraulic oil every 350 hours and readd high-quality, clean 32# anti-wear hydraulic oil. Common faults and troubleshooting of pneumatic pump 1. The gap between the cover plate and the pump box oozes oil and has the sound of air leakage Solution: yellow exhaust plug on cover plate not opened -- unscrew 1-2 turns (for new pump) 2, the oil under the aluminum valve block ooze oil Solution: when the tubing is connected to the valve block, remove the tubing without winding the raw material belt, wrap the raw material belt in 5 circles and tighten it again (for the new pump). The pneumatic pump can not give oil, weak Solution: there is air inside -- step on the pedal of the pneumatic pump to the pressure relief state, press the small twist on the inlet valve with a wrench to discharge the air (for the new pump) 4, the "bang bang" sound of the pneumatic pump is normal, but no oil, or insufficient pressure Solution: hydraulic valve clogged with dirt -- disassemble and clean, replace hydraulic oil (for old pumps) 5.

The pneumatic pump does not work and does not respond to the solution: part of the sealing ring of the cylinder is damaged, or the cylinder cylinder is worn, or there are too many dirty things inside -- disassemble and replace the sealing ring or cylinder, and clean it. 12.3L Foot Pedal Pump Pneumatic Machines. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item.

Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.


Universal Pedal Pneumatic Pump 2.3L 10000 PSI    Universal Pedal Pneumatic Pump 2.3L 10000 PSI