220V 3PH Air-Cooled Hydraulic Station System Air-Cooled Hydraulic Power Unit

  

220V 3PH Air-Cooled Hydraulic Station. System Air-Cooled Hydraulic Power Unit. Small hydraulic stations are suitable for places with limited space or applications that require movement, and are suitable for the hydraulic requirements of small machinery and equipment.

They are small and easy to install and move, which makes them ideal for use in space-constrained environments. Different types of hydraulic components and hydraulic valves can be configured according to needs to meet different process and application requirements.

Shock-proof pressure gauge, more durable. More convenient observation of oil levels. High-efficiency heat dissipation air cooler. It can efficiently dissipate heat and lower the temperature, improve system efficiency and enhance system stability. Larger refueling port, more convenient refueling.

The use of hard tube wiring, longer life, good heat dissipation low heat, more stable operation. The oil tank adopts the thickened profile painting process, which does not lose the paint and does not rust. The machine is small in size and equipped with handles on both sides for easy picking up. Small pressure pulsation, high volumetric efficiency, can automatically adjust the flow. Low installed power, low noise.

The machine is a variable vane pump, more sensitive response, response characteristics only 0.2-0.3s can complete the pressure regulation. Low-pressure energy-saving hydraulic power unit, suitable for various machine tools and light-load lifting equipment. Equipped with oil-discharge air cooling for prolonged operation. Turn on the power switch of the hydraulic station to start the motor.

Observe the operation of the hydraulic pump to ensure normal functioning. Adjust the flow direction and rate of hydraulic oil via the hydraulic valve according to actual needs.

During operation, monitor the working status of the hydraulic station. If any abnormality occurs, stop immediately for inspection. After operation, turn off the power switch of the hydraulic station to stop the motor. Oil Level Determination: Add hydraulic oil until the level exceeds the oil gauge mark. Adjust all regulating handles to their loosest position.

Motor Rotation Direction Confirmation: Jog the motor to check if its rotation direction matches the direction indicated on the motor. If not, interchange any two phases of the three-phase power lines. Note: Operation with oil shortage or reverse rotation is strictly prohibited, as this may cause pump dry-running or damage. Pressure Adjustment: Slowly Adjust The Handle Of The Relief Valve Clockwise Until The Cylinder Begins To Move And Stop The Adjustment. After The Cylinder Is In The Bottom, Continue To Slowly Adjust The Handle Of The Relief Valve, Ensure That The Pressure Gauge Is Adjusted To The Required Working Pressure, And Tighten The Locking Nut.

Adjust The Handle From Loosest To Tightest, And The Pressure From Smallest To Maximum. Speed Adjustment: When The Cylinder Is Moving Forward, Slowly Adjust The Throttle Handle Clockwise Until The Desired Speed Is Adjusted, And Tighten The Lock Nut. Adjust The Handle From Loosest To Tightest, And The Speed From Fastest To Slowest. Note: After The Parameters Are Adjusted, Run The Cylinder Several Times Without Load To Remove The Air In The System!

Check the oil temperature, cleanliness of the hydraulic system and the noise of the pumping station regularly. If the oil temperature is too high or the sound is abnormal, please check whether the hydraulic oil is too little, whether the oil suction filter is blocked, resulting in empty oil pump, need to refuel and replace the oil suction filter. Hydraulic oil such as serious pollution, odor deterioration phenomenon, should be replaced in time, taking into account the high precision requirements of the proportional valve, the general hydraulic oil four to six months to replace once. (According to the frequency of use of the equipment can be replaced in advance or delay) - Check whether the valve assembly and pipe joint on the hydraulic station have oil leakage. If there is leakage, the sealing assembly should be replaced to ensure the volumetric efficiency of the hydraulic system. Whether the electromagnetic reversing valve is sensitive, whether the relief valve pressure regulation effect is normal, whether the throttle valve speed regulation is effective, such as abnormal, should be repaired or replaced hydraulic components. You can make order with no worry. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details.

If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on.

If an item is received damaged, customer service must be contacted within 7 days of receiving your item.