Air Hydraulic Pump

Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir

Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir

Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir    Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir

Condition: New Type: Hydraulic Air Foot Pump Material: Engineering Plastic Color: Black and Yellow Flow Rate: 0.75-0.95L/0.2-0.25Gal/min Driving Mode: Pneumatic Rated Pressure:? 32(Not Included) Available Oil Volume: 2.3L/0.6 Gal Inlet Thread: RC1/4'' Outlet Thread: NPT3/8'' Gross Weight: 10kg/22 lbs Net Weight: 9.5kg/20.94lbs Package Size: 34.22020.5cm/ 13.467.878.07in Product Size: 31.517.521cm/12.46.898.27in. The Hydraulic Pump Efficiently Operates Many Industrial and Construction Ram Applications and is a Great Unit for Use With a Wide Variety of Rams, Presses, and Hydraulic Pullers. Flow Rate: 0.75-0.95L/0.2-0.25Gal/min.

Available Oil Volume: 2.3L/0.6 Gal. Net Weight: 9.5kg/20.94lbs. Package Size: 34.22020.5cm/ 13.467.878.07in. Product Size: 31.517.521cm/12.46.898.27in. It is made of high-class.

To heat, cold, and falls. And durable, extending its service life effectively. It adopts an excellent sealing ring and 70Mpa high pressure, which is higher and faster than common air pumps with better sealing performance. It is designed with a foot pedal to easily control the balance or release of the pump, making the operation easier and freeing your hands!

Brand New, With High-Class Material. Please be sure to clean the air pipe and oil pipe joints before connecting them, otherwise, impurities entering the pipeline will damage the cylinders and hydraulic components and greatly shorten the service life of the pneumatic pump. The air source connected to the pneumatic pump must be de-watered. Air compressors and storage tanks should be drained daily.

The end of the air source of the pneumatic pump is best to add a separate filter to ensure that the air source is clean, which will greatly extend the service life of the pneumatic pump. Please change the 32# hydraulic oil every 350 hours (not included). Please allow for slight color differences caused by shooting light and errors caused by manual measurement, and make sure you don't mind before ordering. Oil seeps through the gap between the cover plate and the pump box and there is a sound of air leakage. The yellow exhaust plug on the cover plate is not opened and loosened for 1-2 turns. Oil seeps from underneath the oil outlet aluminum valve block. The oil pipe is connected to the valve block without wrapping the raw tape. Remove the fuel line, wrap 5 turns of raw tape around it, and retighten. The pneumatic pump does not discharge oil. There is air inside--the pneumatic pump pedal to the pressure relief state, use a wrench to press the inlet valve on the small twist, and the air can be discharged (for new pumps). Pneumatic pump "bang bang" sounds normal, but not out of oil, or insufficient pressure. The hydraulic valve is blocked by dirt. Disassemble clean, and replace the hydraulic oil. The pneumatic pump does not work and does not have a response. The air part of the seal is damaged, or the cylinder is worn out or there is too much dirt inside.

Disassemble and replace the seal or cylinder, and clean it. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.

We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. 100% Brand New, With High Quality, Special Fashion Design, Easy installation, 3-year Wrranty.

Easy installation, Convenient Use, Easy Operation, Nice and Practical, High Quality Packaging. Long service life, Easy installation, Convenient Use, Easy Operation, Compact Design, Unique Appearance, high reliability.

Convenient Use, Easy Operation, Easy installation. Made of high quality material. Air hydraulic jack pump rotary lift + Air Hose. 1/2 gal Hydraulic Air Foot Pump.

1 X Air hydraulic jack pump rotary lift, 1 X Air Hose.
Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir    Air Hydraulic Jack Pump Rotary Lift 10,000 PSI with 2.3L Reservoir