Hydraulic foot pump Hydraulic pump 700bar Air foot pump with hose. Can be opened to access and change the seal inside. Plastic pistons are factory sealed and can only be replaced. We now use TEFLON SEALS on the piston they last longer perform better and withstand the heat very well. So many of these pumps are using steel metal piston sleeves & as you know compressed air carries water in it.
The water in the air will corrode this sleeve, tear the seals, and seize the piston. This sleeve corrosion renders the pump dead as the cost to replace (If it is even available as a part) is very high.
Our pump has an aluminum sleeve with a proprietary anti corrosion coating. Although excessive water will ruin any pump our sleeve will last a very long time.
As the pump pushes oil out it must inhale air into the reservoir. These plastic plugs are constantly clogged, cross threaded, missing and ruin the performance of the pump. We supply a metal AIR VENT with a steel valve burled head. Simple stupid; using the pump turn burled head out (loosen counter clockwise), transporting pump, turn brass burled head down tight (Right clockwise).
There are many brands that still use plastic reservoirs and housings for these style pumps. Well; we all know this is a foot pump so it used / placed on the floor. So it is dragged and dropped constantly. I lost count of how many reservoirs I changed and / or melted and repaired cracks on over the years.I also found tons of shops with their pumps in pails with Oil dry collecting the leaking oil and some idiots running a bone dry pump and ruining them. We supply a cast aluminum reservoir that takes a beating! This is a solid base. It resists corrosion and will not crack or split. Generation II (Yellow) and Generation I (Red) are sent randomly.
Pls kindly make sure you accept the randomness before the order. CAN NOT specify the color (mixed in the same stock). 10,000 PSI air/hydraulic foot pump requires 60-120 PSI air pressure.
Designed to be used with single acting cylinders. Provides hands free operation for pumping and releasing load. Usable fluid capacity 98 cubic inches. With no load, 8.5 cu. Complies with ASME PALD/2009 Safety Standards.Hydraulic pump 700bar Air foot pump with hose. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. A: The item ships from Rancho Cucamonga, CA, United States.
A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item.
The item "Hydraulic Air Foot Pump 10 000 PSI For Auto Body Frame Machines New" is in sale since Tuesday, November 5, 2019. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps".
The seller is "yufann8_6" and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.